Specifications

SKU: sika 109

Weight(grams): 25000

Dimension: 30 cm (Length) x 20 cm (Width) x 15 cm (Height)

SikaTop Seal-109 is used for:
Waterproofing, sealing of hairline cracks and as a protective coating against aggressive elements such as carbon dioxide (for example, in concrete repair work),frost and de-icing agents.
Areas of application include water tanks, basements, car parks, terraces,balconies, bridges, retaining walls, swimming pools, RC gutters, bathroom floors and walls, planter boxes, wet rooms for example kitchens, waste water treatment
plants, shower rooms and laundries.
 
CHARACTERISTICS AND ADVANTAGES:
- Good crack bridging capability (up to 1 mm at +20°C)
- Pre-batched components
- Mixes and applies easily
- Easily applied by roller or brush
- Good adhesion to sound substrates
- Impermeable
- Increased frost and salt resistance
- Decreases carbon dioxide penetration
- Non-toxic, same as cement
- Flexible
- Resistant to freezing and thawing (-10°C)
- Economical
 
COLOUR:
Part A: White liquid
Part B: Grey powder
Parts A + B (mixed): Dark grey slurry
 
PACKAGING:
36 kg sets (Part A: 10 kg and Part B: 26 kg)
 
COVERAGE:
Minimum 2 coats at approximately 1.0 kg/m² per coat. For areas subject to high water ingress, apply a third coat at 1.0 kg/m².
Always ensure waterproof coatings are applied in a minimum of 2 coats.
 
Substrate Quality
Concrete, mortar and masonry surfaces must be clean, free from grease, oil and loosely adhering particles.
Steel and iron surfaces must be clean, free from scale, rust, grease and oil. All surfaces must be as true and flat as possible.