Share:


WEBERPRIM SUPER SEAL

Specifications

SKU: SUPER SEAL

Weight(grams): 20000

Dimension: 20 cm (Length) x 12 cm (Width) x 20 cm (Height)

  • Stir weberprim super seal well, before use. This is particularly important when using weberprim super seal (matt). No further dilution is required.
  • Surfaces to be treated with weberprim super seal must be dry, sound and free of contamination eg. grease, oil, dust, laitance etc.
  • Apply weberprim super seal evenly with a brush or roller. Ensure that thin even coats are applied; rather than thick or lumpy coats.
  • Usually weberprim super seal can be applied as a single coat treatment. However, certain materials may require two (2) coats of sealing for better result.
  • Should a Second Coat is required, allow First Coat to Touch Dry usually within 2 - 4 hours (will vary dependant on weather & porosity of materials); before applying the Second Coat in similar manner.
  • The Second Coat must be applied wet on wet; before First Coat dries out or fully cure.
  • The level of gloss or matt-gloss achieved may vary depending on nature of materials (ie. porosity, surface texture etc.) to be treated and number of treatment coats applied.
  • Preliminary testing on small trial areas is important to determine coverage and compatibility of weberprim super seal with the materials to be treated.
  • Do not apply on damp or wet surfaces. Avoid application during wet weather conditions & onto materials that are extremely hot. weberprim super seal applied on damp or wet surfaces are likely to
    flake, peel or whitened in time.
  • Allow to cure 24 hours (preferably longer) before subjected to light traffic.


 Inquiry - WEBERPRIM SUPER SEAL